Specifications:
| Case Type |
| Type |
Mid Tower |
| Tempered Glass Panel |
Yes |
| Motherboard Support |
ATX, M-ATX, ITX |
| External Features |
| Color(s) |
White |
| Weight |
7.55KG |
| Dimensions |
463 x 220 x 486 mm |
| Expansion Slots |
7 |
| Radiator Support |
Front:
120/240/280/360 mm (≤ 55 mm thickness when fans are installed outside of front panel)
(≤ 30 mm thickness when fans are installed inside of front panel)
[Max Radiator Length ≤ 405 mm]Top:
240/280/360 mm (w/o ODD and w/o ODD bracket)
240/280 mm (w/o ODD but with ODD bracket)
120 mm(When ODD is installed)Rear:
120 mm
[Max Radiator Length ≤ 405mm] |
| Fan Support |
Front :
3 x 120mm/2 x 140mmTop:
3 x 120mm / 2 x 140mm (w/o ODD and w/o ODD bracket)
2 x 120mm / 2 x 140mm (w/o ODD but with ODD bracket)
2 x 120mm / 1 x 140mm(When ODD is installed)Power Supply Shroud:
2 x 120mmRear:
1 x 120mm |
| Pre- Installed Fans |
3 x 120mm ARGB fans in front
1 x 120mm fan (Reverse Fan) on PSU shroud
& 1 x 120mm fan in rear |
| Drive Bays |
5.25": 1
3.5" /2.5": 3/2
2.5": 3 |
| I/O Port |
Power, LED Control Button, 2 x USB3.0, HD-AUDIO |
| Additional Feature |
| PSU |
≤ 205mm |
| Clearance Space |
| Maximum Processor Cooler Height |
≤ 175mm |
| Maximum Graphics Card Length |
≤ 405mm |
Antec DP502 Flux White Ultimate Thermal Performance Gaming Case
Antec DP502 Flux White Ultimate Thermal Performance Gaming
Case. The definition of FLUX is Flow Luxury. The F-LUX Platform is a new industry-leading and highly efficient design by
Antec featuring an advanced
case structure for excellent airflow combined with 5 x pre-installed 120 mm fans. A core element of the design ethos was to provide heightened GPU cooling performance.
The DP502 FLUX White mid-tower gaming
case is well equipped with an industry-leading design of advanced ventilation, taking the
Antec Dark League to the next generation. All the hubs have a dust plug, preventing them from damage. F-LUX Platform adopts the design of a powerful ventilation system via the lower right-side panel, which pulls cool air into the
case through the lower PSU shroud and then up into the main interior; specifically targeting your GPU.
Provide incredible cooling to your components with room for a radiator up to 360 mm in the front, 360 mm on the top & 120 mm at the rear. Provide mass airflow to your components with room for up to 9 x 120 mm fans. Electroplating-processed LED on the top left-hand side presents a Sci-Fi vibration. Ready for a radiator up to 360 mm in front, 360 mm on top & 120 mm in the rear.
This casing has no warranty.
Antec DP502 Flux Review
Antec DP502 Flux
case it has its cons compared to a loan but it’s still open and easy for simple setups.
If I had known the following things with what I had planned I might have spent more for a loan but I’m ok with upgrading things to make it work but it will cost me much more in the long run
1 I have a long GPU so there is no room for a 360mm rad and fans on the side see pic so I could only put it in the bottom which is the next con. I have to get an adapter for usb 3.0 since it hits the rad on the bottom or I’ll have to use my 3.1 and get a converter for that either way it’s more $. And if I vertically install GPU the rad can not go on the bottom or it hits the fans and rad I plan on not getting a water block for my card I’m waiting for 3080 or anything new over 2080 I’m still using my 1080 anyways here’re some pics for you to see and this is not finished and I know it’s suffocating but it’s hard to get stuff delivered right now and I’m gitting a block soon as it wakes my way some day lol and new fans low profile and a be rad for the gpu Pc specs. Rog crosshair vii
Ryzen 5 3600x
MSI gtx 1080
Viper steal 4400mhz
Corsair hx750 platinum
This is my very first dream build IV built lots of systems but this has all been stuff I have personally liked for my own reasons there is better and I could get it but I have always liked these parts and components for my own vision still a work in progress
