Corsair Vengeance RGB PRO 8GB DDR4 3600MHz Desktop Ram
Vengeance RGB PRO 8GB DDR4 3600MHz Desktop Ram overclocked memory lights up your PC with mesmerizing dynamic multi-zone RGB lighting, while delivering the best in DDR4 performance.
VISUALIZE, SYNCHRONIZE, MEMORIZE
VENGEANCE RGB PRO Series DDR4 overclocked memory lights up your PC with mesmerizing dynamic multi-zone RGB lighting, while delivering the best in DDR4 performance.
NEXT GENERATION SOFTWARE
Powerful CORSAIR iCUE software brings your system to life with dynamic RGB lighting control, synchronized across all your iCUE compatible products, including memory, fans, RGB LED light strips, keyboards, mice and more. Customize dozens of preset lighting profiles, experiment with a huge variety of user adjustable colors and adjust LED brightness to perfectly match your system.
MAXIMUM BANDWIDTH AND TIGHT RESPONSE TIMES
Optimized for peak performance on the latest Intel and AMD DDR4 motherboards.
NO WIRES REQUIRED
Requires no extra wires or cables for a clean and seamless install.
CUSTOM PERFORMANCE PCB
Provides the highest signal quality for the greatest level of performance and stability.
TIGHTLY SCREENED MEMORY
Carefully screened ICs for extended overclocking potential.
ALUMINUM HEAT SPREADER
Improves thermal conductivity for superb memory cooling even when overclocked.
XMP 2.0 SUPPORT
A single BIOS setting is all that’s required to set your memory to its ideal performance settings, for optimum performance.
Corsair Vengeance RGB PRO 8GB DDR4 3600MHz Desktop Ram Review
Today, we are checking the Vengeance RGB PRO 8GB DDR4 3600MHz Pro CL18 (pretty average latency figure) memory in a 32 GB set consisting of four 8 GB modules. This is not the first time we’re looking at the Corsair RAM. It was for example the Vengeance RGB Pro (4x8 GB 3200MHz) or Dominator Platinum (4x8 GB 3600 MHz CL16). Ok, but what’s different comparing the above-mentioned Vengeance RGB Pro series? The major thing is that it has a heat spreader of just 44mm tall (so 7 mm less) for wider compatibility with air coolers and smaller form factor chassis, each module looks great from any angle.
The Vengeance RGB PRO 8GB DDR4 3600MHz Pro SL series has a lightbar with ten Individually Addressable LEDs. They also have triangular cutouts on the sides of the heatsinks to reveal more RGB lighting from the diffuser. Like all Corsair products, the lighting is controlled via the iCUE software. The memory is also compatible with Asus Aura Sync and MSI Mystic Light Sync. What else can we say about this product line? The range of speeds is rather limited. You get to choose between 3200 MHz (CL16) and 3600 MHz (CL18), with XMP 2.0 support. The latter should suit most systems fine. The capacity is between 16 GB (double stick) and 128 GB (2 sticks). The manufacturer claims that all modules have the best compatibility with Intel 500 Series, AMD 500 Series, AMD X570 systems. Another thing that looks good is the use of a ten-layer PCB, which should improve stability. The provided review sample consists of four 8 GB modules (so a high-capacity kit) with a frequency of 3600 MHz and CL18 (and that’s rather mediocre), the exact timings are 18-22-22-42 at a voltage of 1.35 V.
Corsair is again offering the modules in black and white so the optics should match the rest of the system components perfectly. Corsair for sure went for the looks, but the performance figures should loo all right. We are going to check how this kit performs on two platforms: a Z390-based motherboard/CPU (for the last time), as well as an X470 one. We are traditionally still going to try and squeeze something more out of it, so maybe the standard 3600 MHz is not the last word here (or at least we might manage to fine-tune the latencies). If you prefer, you can always stay on the safe side and stick to the advertised frequency and latencies using XMP. The Vengeance RGB Pro SL series is backed by a limited lifetime warranty. The MSRP is 243.99 $ (8 GBx4, 3600MHz). Ok, next page, please.
The Vengeance RGB PRO 8GB DDR4 3600MHz Pro keyboard is the one we’re reviewing today. It’s not the first one from the K70 series checked on guru3d. Previously those were K70 RGB Rapidfire Mk2, also in a low-profile version, and as a TKL, so overall, there shouldn’t be any significant surprise as far as the general concept goes. Corsair K70 RGB Pro takes some K100 RGB and (most of) K70 RGB TKL CHAMPION (already mentioned) features. The suffix “Pro” wasn’t used yet, so probably it was the right time for that.
Corsair is back with a new kickass chassis; this time, we're testing the Corsair 5000T RGB. It's a unique chassis with plenty of room, concealment choices, and clearance for a large amount of liquid...
Corsair has a refresh of liquid coolers, this round the Corsair H150i Elite LCD (IPS) edition is put on our test bench where we can check out the behavior of the triple-fan 360mm model. Corsair has p...
In this article, we review the Corsair M65 RGB Ultra mouse. It’s an optical mouse that was launched on 21st September. It’s a new release from the M65 series, which was introduced already seven years ago. After two years – the Pro edition was introduced, and in 2019 there was an M65 RGB Elite version; what do we have now?
Specifications
| Capacity |
16GB (2 x 8GB) |
| Memory Type |
DDR4 |
| Bus-Speed |
3600MHz |
| Single/Dual sticks |
Dual Sticks |
| Number-of-Pin |
288 |
| Latency |
18-19-19-39 |
| SPD Speed |
2133MHz |
| SPD Voltage |
1.2V |
| Voltage |
1.35 |
| Heat sink type |
Anodized Aluminum |
| RGB Type |
LED Lighting |
| Warranty |
Lifetime |
