Specification
| Case Type |
| Type |
Mid Tower |
| Front Panel |
ARGB lighting effect |
| Tempered Glass Panel |
Yes |
| Motherboard Support |
E-ATX , ATX , Micro-ATX, ITX |
| External Features |
| Color(s) |
Pink |
| Weight |
Net Weight : 7.87 Kgs
Gross Weight : 9.11 Kgs |
| Dimensions |
470 x 230 x 500 mm (D x W x H) |
| Expansion Slots |
7 + 3 |
| Radiator Support |
Front: ≤ 360mm
Top: ≤ 280mm
Rear: ≤ 140mm |
| Fan Support |
Front: 3 x 120mm /3 x 140mm
Top: 2 x 120mm/ 2 x 140mm
Rear: 1 x 120mm / 1 x 140mm |
| Pre- Installed Fans |
2 x 200mm ARGB fans in front,
2 x 140mm ARGB fans on top,
1x 140mm ARGB fan in rear |
| Drive Bays |
5.25": 0
3.5"/2.5" (convertible): 3 / 1
2.5": 4 |
| I/O Port |
Power,
Reset,
LED Control Button,
MIC/Audio,
USB2.0 x 2,
USB3.0 x 1 |
| Additional Feature |
| PSU |
≤ 200mm |
| Side Panel |
Tempered Glass Side Panel |
| Clearance Space |
| Maximum CPU Cooler Height |
≤ 180mm |
| Maximum Graphics Card Length |
≤ 350mm |
| Warranty |
| Warranty |
No Warranty |
Antec NX800 PINK Mid Tower ARGB Gaming Case
The New
Antec NX800 PINK Mid Tower ARGB Gaming
Case comes with a bevy of in-demand USB 3.0 connectivity, ample storage drive bays, room for expansion, and includes 2 x 200 mm ARGB fans in front & 2 x 140 mm ARGB fans on top & 1 x 140 mm ARGB fan in the rear. With support for up to a 360 mm liquid cooling radiator in front & 280 radiators on top.
Motherboard Compatibility and I/O Supports:
This
Antec NX800 PINK Mid Tower ARGB Gaming
Case supports E-ATX, ATX, Micro-ATX, and ITX motherboards, and features with Mid Tower Form Factor, Power, Reset, LED Control Button, MIC/Audio, USB2.0 x 2, USB3.0 x 1 Front Access & Controls, Tempered Glass Side Panel.
This Gaming
case comes with 7 + 3 PCI-E Slots so that you can install the GPU card vertically.
Color Your System Up To 6 Fans
You can decorate your
Antec NX800 PINK
Case with Up To 6 Fans. Here, 2 x 200mm ARGB fans in front, 2 x 140mm ARGB fans on top, 1x 140mm ARGB fan in rear are Included in this
case and also supports 3 x 120mm /3 x 140mm in the Front, 2 x 120mm/ 2 x 140mm Fan in Top panel, 1 x 120mm / 1 x 140mm in Rear. This gaming
case also has a Dust Filter on the Front/ Top/ Bottom. The latest
Antec NX800 PINK Mid Tower ARGB Gaming
Case has no warranty.
Antec NX800 PINK Mid Tower ARGB Review
Needed to upgrade from the Phanteks Evolv non-TPG as my top mount radiator was heating up the top cover. Didn't want to mod that so I found the NX800 as available. Other
cases were sold out and wait times seemed forever.
I have a 280mm rad on top for CPU (8700K de-lidded) and in the front is also a 280mm rad for my GPU (GTX1080 with NZXT adaptor). This does not get how at all. While gaming, lets say Warzone, my GPU doesn't go past 38c and CPU floats in the mid 50c range on an 8700K OC'ed to 5.0ghz, 1.32V. Them 200mm fans is taking care of the GPU temps fairly nice. I did place the rad low with the top portion of the fan blowing air to the RAM and CPU area. Otherwise that front 280mm would impede airflow.
Temps compared to the my old furnace of a
case whilst gaming changed from GPU=47C-->38C and CPU from 67C to 55C on average. Even bench marking got fun again...
Build quality is plastic.. Glass is nice. It's easy to work with. My only minor gripe would be the thumbscrews, they are not captive. Overall this is a good recommend.
