Specifications:
| Case Type |
| Type |
Mid Tower Gaming Case |
| Front Panel |
Front Access & Controls: Power, Reset, LED Control Button, MIC/Audio, USB2.0 x 2, USB3.0 x 1 |
| Tempered Glass Panel |
Side Panel Tempered Glass |
| Motherboard Support |
E-ATX , ATX , Micro-ATX, ITX |
| External Features |
| Color(s) |
White |
| Weight |
Net Weight: 7.87 kgs
Gross Weight: 9.11 kgs |
| Dimensions |
470 x 230 x 500 mm (DWH) |
| Front Ports |
Power, Reset, LED Control Button, MIC/Audio, USB2.0 x 2, USB3.0 x 1 |
| Expansion Slots |
7 expansion slots + 3 Vertical Expansion Slots |
| Radiator Support |
Front: ≤ 360mm
Top: ≤ 280mm
Rear: ≤ 140mm |
| Fan Support |
Front: 3 x 120mm /3 x 140mm
Top: 2 x 120mm/ 2 x 140mm
Rear: 1 x 120mm / 1 x 140mm |
| Pre- Installed Fans |
Front: 2 x 200mm ARGB fans
Top: 2 x 140mm ARGB fans
Rear: 1x 140mm ARGB fan |
| Drive Bays |
5.25": 0
3.5"/2.5" (convertible): 3 / 1
2.5": 4 |
| I/O Port |
Power
Reset
LED Control Button
Audio/Mic
USB 2.0 x 2
USB 3.0 x 1 |
| Additional Feature |
| PSU |
≤ 200mm |
| Side Panel |
Tempered Glass |
| Clearance Space |
| Maximum Processor Cooler Height |
≤ 180mm |
| Maximum Graphics Card Length |
≤ 350mm |
Antec NX800 Mid Tower Gaming Case (White)
Antec NX800 Mid Tower Gaming
Case (White) is combines a bevy of in-demand features- USB 3.0 connectivity, ample storage drive bays, room for expansion, and includes 2 x 200 mm ARGB fans in front & 2 x 140 mm ARGB fans on top & 1 x 140 mm ARGB fan in rear. With support for up to a 360 mm liquid cooling radiator in front 280 radiator on top, and 140mm radiator in the rear. The
Antec NX800 is easy to build with SPCC + Plastic, and easy to cool. This casing has Power, Reset, LED Control Button, Audio/Mic, USB 2.0 x 2 and USB 3.0 x 1 I/O ports. The
Antec NX800 supports E-ATX, ATX, Micro-ATX, ITX motherboard, ≤ 200mm power supply.
Here is already included 2 x 200mm ARGB fans in front, 2 x 140 mm ARGB fans on top & 1 x 120mm ARGB fan in rear. This NX800 Mid Tower
Antec Gaming
Case will gives you excellent gaming performance.
Antec NX800 Mid Tower Review
Needed to upgrade from the Phanteks Evolv non-TPG as my top mount radiator was heating up the top cover. Didn't want to mod that so I found the NX800 as available. Other
cases were sold out and wait times seemed forever.
I have a 280mm rad on top for CPU (8700K de-lidded) and in the front is also a 280mm rad for my GPU (GTX1080 with NZXT adaptor). This does not get how at all. While gaming, lets say Warzone, my GPU doesn't go past 38c and CPU floats in the mid 50c range on an 8700K OC'ed to 5.0ghz, 1.32V. Them 200mm fans is taking care of the GPU temps fairly nice. I did place the rad low with the top portion of the fan blowing air to the RAM and CPU area. Otherwise that front 280mm would impede airflow.
Temps compared to the my old furnace of a
case whilst gaming changed from GPU=47C-->38C and CPU from 67C to 55C on average. Even bench marking got fun again...
Build quality is plastic.. Glass is nice. It's easy to work with. My only minor gripe would be the thumbscrews, they are not captive. Overall this is a good recommend.
