Deepcool MATREXX 55 MESH ADD RGB 4F Casing
Deepcool MATREXX 55 MESH ADD RGB 4F Casing, The front is a mesh configuration. Inside the mesh, there's a tight air hole and a non-removable dust filter configuration that barely shows three standard 120mm fans. The right part is made of metal. The I / O port is located and consists of two USB 2.0 Type-A x, one USB 3.2 Gen 1 Type-A x, HD AUDIO, RGB control buttons, and power button. At the bottom is engraved logo. The top has air holes at the top for smooth air flow, and the built-in dust filter is easy to attach and detach by magnet, The metal side panels on the right are joined by two clasps at the front and clasps at the back, The air hole in the power supply unit is equipped with a dust filter to prevent dust from entering.
Since it is not a slide type, the case must be laid down for removal, The cooling fan can be equipped with a total of six front three, two top and one rear, and three front and one rear are standard , I/O Panel : USB 2.0 Type-A x 2, USB 3.2 Gen 1 Type-A x 1, HD Audio, RGB Control Button, Pwer Button
Specifications:
| Motherboard |
Mini-ITX/Micro-ATX/ATX/E-ATX |
| Case Type |
Middle Tower |
| Materials |
ABS+SPCC+Tempered Glass |
| Product Dimensions |
440X210X480mm |
| Carton Dimensions |
523X277X514mm |
| Net Weight |
6.6Kg |
| Gross Weight |
7.6Kg |
| 5.25" Drive Bays |
0 |
| 3.5" Drive Bays |
2 |
| External 3.5'' Drive Bays |
0 |
| 2.5" Drive Bays |
4 |
| I/O Ports |
USB2.0×2、USB3.0×1、Audio×1、Mic×1 |
| Expansion Slots |
7 Slots |
| Power Supply Type |
ATX PS2 （Length less than 170mm） |
| Cable Management |
23mm clearance |
| CPU Cooler Height Limit |
168 mm |
| VGA Length Limit |
370mm |
|
Cooling Fans Support |
Optional: Front:140mm×3/120mm×3; Top:140mm×2/120mm×2 Rear: 1×120mm |
| Pre-installed:Front:3×120mm A-RGB fan; Rear:120mm x1 A-RGB fan |
| Liquid Cooler Support |
Front:120/140/240/280/360mm;Top:120/140/240/280mm; Rear:120mm |
| EAN |
6933412714149 |
| P/N |
DP-ATX-MATREXX55-MESH-AR-4F |
| One (01) Year Warranty |
