Apacer AS2280Q4 1TB PCIe Gen 4x4 M.2 NVMe SSD
The Apacer AS2280Q4 SSD is designed with PCIe connector pinouts. It provides full compliance with the latest PCIe Gen4x4 interface specifications and conforms to NVMe requirements. It not only delivers exceptional performance of nearly 10 times faster than a SATA SSD and power efficiency but is also fully compatible with PCIe 3.0. This SSD provides up to 5000+ MB/s reading and 4400+ MB/s writing speeds. It is built with 3D TLC NAND Flash. It offers a capacity of 1TB and performs higher efficiency and reliability. It supports over-provisioning technology to extend a longer operating lifetime by effectively executing garbage collection, wear-leveling, and bad block management. The built-in protection technology not only ensures users of a perfect high-speed experience but also data integrity and stability. It features a dedicated Heat Sink for Better Cooling. The Apacer AS2280Q4 SSD supports a Thermal Throttling mechanism to dynamically adjust frequency scaling to enhance data reliability and provide sustained performance while overheating. Furthermore, with E2E (End-to-End) Data Protection to extend error control, AS2280Q4 ensures superior data security, integrity, and a longer SSD lifetime. It has 3 years of warranty.
Specifications:
| Key Features |
| Capacity |
1TB |
| Flash Type |
NAND Flash (3D TLC) |
| Interface |
PCIe Gen 4x4
Compliant with NVMe 1.3 |
| Sequential R/W |
Read: up to 5000 MB/s
Write: up to 4400 MB/s |
| MTBF |
1,500,000 hours |
| Others |
NAND Flash: 3D TLC
IOPs (4K Random Write): Up to 750K IOPs
ECC Support: Up to 72bit/1KB
Low Power Consumption (Active/Idle): 275/80mA
Humidity: 5%~95%
Vibration: 5~800HZ/3.13G |
| Physical Specification |
| Dimension |
(L)80 x (W)22 x (H)1.35mm |
| Weight |
8.3g |
| Temperature |
| Operating Temperature |
0℃ ~ 70℃ |
| Storage Temperature |
-40°C ~ +80°C |
| Shock resistance |
1500G/0.5 msec |
| Warranty |
| Manufacturing Warranty |
3 Years |
