Specification
| Output |
- Max Configurable Power (Watts):600 Watts / 1.0kVA
- Output Frequency (Sync To Mains):50/60 Hz +/- 1 Hz Unsynchronised
- Other Output Voltages:230 V
- Topology:Line Interactive
- Waveform Type:Stepped Approximation To A Sinewave
- Transfer Time:4 Ms Typical : 8 Ms Maximum
|
| Input |
- Input Frequency:40 - 70 Hz +/- 5 Hz Auto-Sensing
- Input Voltage Range For Main Operations:140 - 300V
- Number Of Power Cords:1
|
| Batteries & Runtime |
- Battery Type:Lead-Acid Battery
- Typical Recharge Time:6hour(S)
- Nominal Battery Voltage:24 V
- Battery Volt-Amp-Hour Capacity:84
|
| Communications & Management |
- Control Panel:LED Status Display With On Line : On Battery
- Audible Alarm:Alarm When On Battery : Distinctive Low Battery Alarm
|
| Surge Energy Rating |
|
| Physical |
- Maximum Height:182MM, 18.2CM
- Maximum Width:130MM, 13.0CM
- Maximum Depth:320MM, 32.0CM
- Net Weight:7.8KG
- Shipping Weight:8.5KG
- Shipping Height:275MM, 27.5CM
- Shipping Width:192MM, 19.2CM
- Shipping Depth:390MM, 39.0CM
- Color:Black
|
| Environmental |
- Operating Temperature:0 - 40 °C
- Operating Relative Humidity:0 - 95 (Non-Condensing) %
- Operating Elevation:0 - 3000meters
- Storage Temperature:-20 - 50 °C
- Storage Relative Humidity:0 - 95 (Non-Condensing) %
- Storage Elevation:0 - 15000meters
- Audible Noise At 1 Meter From Surface Of Unit:40.0dBA
- Protection Class:IP20
|
| Warranty |
|
APC Easy 1000VA Offline UPS
This device adjusts voltage levels automatically, ensuring compatibility with your equipment. It provides visual indicators for easy understanding of unit and power status. The product is tested and approved for safe operation with connected service provider equipment and in the specified environment. The outlets offer ample runtime for critical low-power devices during power outages. It protects hardware and data from power disruptions. It notifies you of changes in utility power and UPS conditions, and displays clear status information.
The device corrects low voltages without discharging the battery, preserving battery life and maximizing runtime. Its slim, modern design can be positioned upright, flat, or wall-mounted to suit any electronics setup and home décor. It provides temporary battery power during utility outages and protects equipment without blocking access to other receptacles. The unit maximizes battery performance through intelligent charging and offers early fault analysis for preventive maintenance. It safeguards your Home UPS from various issues, including overloads, excessive voltages, short circuits, installation mishaps, and low voltage damage to batteries.
